Bontrager's Bat Cage is light, holds your water bottles (sold separately) firmly without marking them up, and has been ridden to victory in all three Grand Tours! It's ready to work for you too!
Small parts can be hard to keep up with. If you've lost pieces of the mounting hardware for your Speed Concept Water Bottle Cage, don't sweat it. You'll find all the replacement parts in this handy hardware kit. • Aluminum
Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
Topeak's Shuttle Cage AL is the classic aluminum cage for your bottles. It holds securely and gives you quick access to your bottles.
Fill ‘em up with water, top-secret energy drink mixes, or soda pop. Then drink out of them. All of Salsa's bottles use BPA-free plastic, 100% FDA food-grade materials, non-solvent base (UV cured) CPSC-approved ink.
Formed using 6mm, hollow 6061-T6 aluminum tubing, this lightweight and economical cage has a durable powder coat finish designed to keep it looking good. Key features: - 6061-T6 aluminum rod with two-piece bracket - Durable powder coat finish - Special design fits over front derailleur bands - Hollow tubing eliminates 15g without loss of strength
Storage made simple Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage. Key features - Wide opening for easy access - Fits in standard water bottle cages - Securely holds tools, CO2, spare tube, tire levers and more
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
Blackburn's Carbon Cinch Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Topeak's lightweight, durable Mono Cage CX holds on tight and won't scratch, corrode or stain your bottles.
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.
An innovative low profile quick release system that fits between the bottle cages and bike frame that allows each cage to be removed without the need to unscrew the bolts. This lets extra small bike frames to be carried by a rear mounted car racks (by allowing more room between the frame tubes when cages are removed) and prevents cage damage by rear type bike carriers. The perfect solution for preventing damaged bottle cages for all bike frame sizes.
Profile's Axis Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded construction is incredibly strong and light, too!
Stay hydrated and show your allegiance to speed with Zipp's Water Bottle. They're made by Purist and feature bold Zipp logos so you're always repping.
Recommended for ages 3 - 8, the CamelBak Kids' eddy water bottle features a spill-resistant design and fun graphics to keep you and your kids happy.
Profile's Insulated Water Bottle keeps your beverages cool while keeping you hydrated. It features a wide top for adding ice and drink mix, and is super easy to squeeze.
The original Blackburn cage design. - Welded aluminum for lightness and strength - Aluminum construction - Budget-friendly - 47 grams
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!
- 5mm titanium tubing construction - 26 grams - Incredible strength-to-weight ratio
CatEye's nylon bottle cage is impact resistant and lightweight at just 29 grams.
Page 1 of 5 Next page