Other

Lightweight alloy lever. - Strong Cro-mo axle

Fun handlebar-mount streamers. - Quick and easy installation

Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp

This custom-made Dropper Post Adapter allows Backcountry Saddle Packs to be used on mountain bike dropper seatposts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag. Comes with a choice of shims for dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the adapter is also compatible with any bag that uses a 25mm seat post strap (or smaller). - Designed to work with MTB dropper posts with a 25mm or 26mm upper section diameter - Injection moulded glass-reinforced nylon for durability - Silicone shim for a secure fit - 4.5 x 4.8 x 3.5cm - 53g

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar

With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Campagnolo EKAR disc brake adapters. - Includes bolts

Campagnolo EKAR disc brake adapters. - Includes bolts

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.

Campagnolo Extra Parts

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems

Campagnolo Pulley Assemblies

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet