Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$123.87
Enjoy cycling in any weather. The Bluemels 75 U fenders cover tire widths up to 65mm. They use a proprietary construction with super-fine aluminum strips embedded in a matte black plastic coating, making these mudguards extremely durable and resistant to bending and UV damage.
- Very wide profile for tires up to 65mm width
- Proprietary construction embeds super-fine aluminum strips into matte black plastic coating
- For 27.5 and 29-inch wheels
- Includes accessory parts and stays
- Weight: 800g

$54.09
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$32.73
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$35.58
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

$54.09
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$112.46
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
- Urban fender set
- Sturdy aluminum profile design for urban bikes
- Black U-stay
- Includes accessory parts and stays
- Weight: 568g

$35.58
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

$49.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$94.99
Ride in any weather
The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount.
Product details
- Fully assembled fenders that install in minutes
- Integrated rear Blendr light mount for use with Bontrager Flare lights
- No-cut struts allow quick strut adjustment for proper tire clearance
- Double-back strut on rear fender adds support and stability
- Made of lightweight yet super-durable polycarbonate
- Stainless steel hardware resists rust
- Four sizes available to accommodate most bike and tire configurations

$67.00
Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

$59.99
Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

$103.92
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes

$41.99
- Fits tubes from Ø27 to 35mm
- Fits 26" to 28" wheels
- Two width options: 51mm and 46mm
- Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes
- Expander range on front and rear for perfect fitting
- Adjustable L shape steel bracket for rear and front mudguard
- For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay
- Mounting kit included

$23.00 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Deep side skirts protect stanchions and dust seals from rocks and debris

$98.22
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber

$106.77
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

$54.09
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 26-inch and 27.5-inch wheel compatible

$19.99
- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm)
- Quick and easy to install
- Tool-free
- Reflective safety stickers
- Shock-resistant polymer
- 100% recyclable material

$66.99
Functional. Fashionable. Fenders.
Keep you and your threads clean and dry by adding stylish fenders.
- Front and rear full-length fenders designed for use on Townie 24-inch bicycles
- Fits Step-Thru Townie Original models
- Compatible with tires up to 2.0-inch wide
- Protects against pesky mud and splashes

$16.99
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England

$55.99
- Deflector FM60 front and RM60 rear mudguard set
- Easy, tool-less mounting systems
- RM60 mounts on seatposts and is compatible with 26'' and 27.5'' wheels
- FM60 mounts inside steer tube and is compatible with 26'' to 29'' wheels
- Width: 60mm to 72mm

$20.99 - $31.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$109.99
Spice up your eBike with an Electra fender set.
- Front and rear full-length fenders designed for use on Townie Path Go! eBikes
- Fits both step-thru and step-over Townie Go! models
- Will not fit other Townie bike models
- Protects against pesky mud and splashes

$106.77
The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.

$14.22
- Spoiler/lower fender
- 35mm fits 35 Chromoplastics, Commuter II & Raceblade fenders
- Hardware included

$86.83
The Stingray mudguards supplement SKS's Bluemels range in the accustomed quality with modern colors in a matte design. First-grade plastic with an aluminum core for high-impact resistance. The stays feature quick-mounting fixed end caps. These fenders feature an elegant matte finish, edge protectors, and an automatic stay release safety system for the front.
- Same features as the Commuter II fenders with the addition of colors and blacked out V-Stay
- Fits tires 700 x 28-37mm
- 45mm profile width

$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 752 g / 1.66 lbs (pair)
Construction
- Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
- Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting

$35.58
Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.
Page 1 of 4
Next page