Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Bontrager Race Lite Clip-On Aerobars S-Bend
$149.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Shimano In-Line Brake Cable Adjuster
$39.49
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
KMC MissingLink Connector
$25.70
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
KMC Missing Link 11-DLC
$28.50
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs
Wheels Manufacturing Inc. Chainstay Protector - Wide
$9.49
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Hayes Master Cylinder Body/Lever Parts
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Wheels Manufacturing Inc. BB30 Clips
$21.00
Replacement retainer clips for BB30 bottom brackets to retain the 6806 bearings in place. - For BB30 standard frames - Sold 2 per bag
Eclypse Triathlon SL Aero Bars
$106.99
- S-bend triathlon bars - Lightweight 6061-T6 alloy - Easy to clean detachable pads - Cable holes make it compatible with bar end shift levers - Internal diameter: 19.6mm - 475 g - With 26.0 and 25.4mm shims
3T Comfort Cradles and Pads Kit - Carbon
$162.99
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.
Wheels Manufacturing Inc. Custom M6 Bolt Set for Derailleur Hanger
$7.49
Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)
Electra Townie Quick-Release Seatpost Collar
$12.48 - $20.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
Zipp End Plug Vuka Extension
$8.49
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Jagwire Shimano Disc Brake Hose Needles
$13.99 - $21.99
Jagwire Disc Brake Hose Parts - For use only with Shimano branded hydraulic hose
3T Arx II Team Bolts Kit
$49.99
Set of 5 Torx bolts for faceplate and steerer clamp, for Arx II stems.
3T Compact Cradles and Pads Kit - Alloy
$117.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
Paul Component Engineering Funky Monkey Front Cable Hanger
$97.50
- Cable stop for front centerpull and cantilever brakes - Integrated barrel adjuster for cable tension. 26G - Made in USA
Thomson X2 Stem Replacement Clamp
$19.99
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X2 stems
Wheels Manufacturing Inc. Derailleur Hanger 57
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x8 Flat Head Screws
49°N Alloy Seat Clamp
$7.99
Forged Alloy seat-clamp.
Profile Design J4 Bracket Kit
$177.99
Profile Design's J4 Bracket Kit lets you fine-tune your aero position down to the millimeter. For lightness, strength and aerodynamics, the brackets are made of forged and CNC-machined 6061 aluminum and have Marine-quality 12.9-grade bolts that are corrosion-resistant and hidden. For easy and fast adjustability, by simply loosening the fixing bolt on each side you can slide your extensions in and out. Meanwhile, the brackets hold the armrests set back 20mm from the center of the base bar or you can reverse the armrests for a forward position. You can also stack aftermarket risers on the brackets to raise the armrests (armrests, risers and extensions sold separately).
FSA Microspacer Headset Spacers
$14.99
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Wheels Manufacturing Inc. Derailleur Hanger 365
$55.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #254093-222 - For Shimano Direct Mount derailleurs - M12x1.0 Thru Axle - Attaches to frame with (1) special M5 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Profile Design Subsonic Race 35a
$289.99
The Subsonic/Race/35a aerobar combines the low stack Subsonic bracket with the arm-hugging Race armrest to offer an industry-leading fit range oriented towards low, narrow positions. The 35a extension offers a comfortable 35 degree angle with a 80mm rise. This is the only low stack clip-on in the market that maintains the pad-to-grip angle as the bar is stacked up Subsonic is not just another aerobar bracket. It brings our next-generation fit range to a low stack bracket design. This allows the bar to use our riser kits to increase the stack without changing the relationship between the armrest and the grips. The Race armrest has been designed to tightly cup the riders arms – facilitating a narrow position and increasing control at speed. Performance - The Subsonic/Race is designed to achieve a lower stack height than standard aerobars, without the added frontal area of a below-the-basebar extension clamping system. This improves aerodynamics and the fit range. Fit Data - Armrest offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 142mm to 272mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: The minimum is 40mm and the bracket is compatible with our existing risers which add up to 70mm of stack in 5mm increments. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1200 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable low stack clip-on on the market. Origin Story After we released the Supersonic (J5) as a premium bracket with market leading fit options and verstility we wanted to bring the same kind of options to teh rest of our range of brackets and thus aerobars. Where our supersonic and Sonic brackets have a minimum stack of around 60mm, like most of the popular aerobars - we wanted the Subsonic to offer a substantially lower position. This helps the segment of the market who struggle to get into their ideal position with modern bike frames. And it was vital that we include stack height adjustment without altering the pad grip relationship - so our riders have the ability to fine-tune every aspect of their setup. The Race armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrest, smaller increments of movement are achieved - making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Additionally, there are two thicknesses of cushion available to ensure a snug fit for different sized arms. Who is it for - This bar is perfect for riders who wish to achieve lower positions than are possible with standard aerobar designs. Unlike other low stack bars, it allows fine-tuning of the stack height so the rider is not limited to only one armpad height. With the Race armrests fitted, it is tailored towards riders who intend to be low and narrow to punch the smallest possible hole through the wind. - Bracket: Subsonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Race / 5mm Pads - Extension Length: 350mm - Width: 142mm to 272mm - Weight: 590g
Wheels Manufacturing Inc. 8.3mm Inner Chainring Spacer, Bag of 20
$24.99
8.3mm chainring spacer for the inner chainring position. Machined to close tolerances out of 6061 aluminum. Excellent for improving chain line or for replacing missing spacers. - Inner Diameter: 8mm - Thickness: 8.3mm - 20 per bag
Cane Creek 3G Thudbuster Rebuild Parts and Tool Kit
$54.99
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Wheels Manufacturing Inc. Derailleur Hanger 368
$55.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Santa Cruz Part #23-18684 - Fits Santa Cruz frames with 12 x 148mm thru axles only - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 185
$44.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. 7.1mm Inner Chainring Spacer, Bag of 20
$29.99
7.1mm chainring spacer for the inner chainring position. Machined to close tolerances out of 6061 aluminum. Excellent for improving chain line, or for replacing missing spacers. - Inner Diameter: 8mm - Thickness: 7.1mm - 20 per bag
Wheels Manufacturing Inc. Derailleur Hanger 2
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring bolt
FSA Torx T-30 Double Chainring Nut/Bolt Set
$30.00
This FSA Double Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - Torx wrench included
Page 1 of 19 Next page