Filter By:
Headsets

$69.99 - $75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

$149.99
- Carbon fiber top cover
- Upper: Campagnolo angular contact bearings (black seal)
- 1-1/8-inch, 45 degrees/ 45 degrees ACB upper
- 1.5-inch, 36 degrees/ 45 degrees ACB lower
- For tapered 46mm/56mm OD headtube
- For 1-1/8-inch to 1.5-inch tapered fork

$14.99
- Microspacers ensure the correct fitment of integrated headsets
- Use between the top cover and the compression ring to ensure the top cover does not contact the headtube
- Sold in bags of 10

$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS49/28.6/H8/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 49.61mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 57g

$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
Technical Description: ZS56/30/H4/x
Bottom Type: ZS - ZeroStack
Bottom Head Tube Inside Dia.: 55.95mm
Crown Race Seat Dia.: 30.015mm
Crown Race Type: Aluminum, Dual-Seal
Bottom Stack Height: 4mm
Bottom Bearing Type: Top-quality, sealed stainless steel bearings
Material: 7075 aluminum
Weight: 61.34g
Part Number: BAA0156x

$120.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly. This version uses a ZeroStack top cup and an external cup on the bottom.

$39.99
- Technical Description: AngleSet ZS56 Offset Bottom Cup
- Material: 7075 Aluminum
- Weight: 26 grams

$194.99
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1-degree so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

$80.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS42/28.6/H9/K|IS52/40/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 42.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 84g

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$40.50
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes
- Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only
- Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes
- King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes

$100.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC44/40/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.76mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 61.02g

$58.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$50.00 - $55.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

$100.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum

$62.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap

$199.99 - $216.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

$34.99
Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.

$40.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: EC34/28.6/H16/K
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 33.95mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 48.17g

$39.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube.
- Lower part of the headset sold separately

$6.00 - $14.50
- Super light carbon spacers for tuning stem height
- Spacers are internally weight relieved to drop a few extra grams

$58.99
This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

$51.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS56/40/H4/K
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.

$34.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 62.79g

$59.99
Cane Creek compatible integrated style bearings fit directly into headtube.
- 36-degree inner chamfer and 45-degree outer chamfer
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

$42.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: N/A
• Weight: 72g

$39.99 - $40.99
Can Creek's Angleset headsets let riders change the headtube angle of their mountain bike with ease. With adjustments ranging from 0.5 to 1.5-degrees, dialing in the perfect geometry has never been easier.
• Technical Description: ZS49/28.6/H11/K|EC49/40/H16/K
• Offset angle: 0, 0.5, 1.0, 1.5-degree
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Sealed
• Bottom Stack Height:
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 7075 aluminum
• Weight: 129g
Page 1 of 3
Next page