Accessories

Compact and lightweight, ABUS' high-security Granit Plus 640 U-Lock is capable of locking around reinforced parking meters. The 640 features a 12mm special hardened-steel round shackle that retains its flexibly to offer great protection again crowbar attacks. The upgraded locking mechanism bolts 4 times into the lock body (2 times per shackle side) to provide excellent protection against twisting/torsion/cutting attacks, while still offering great feel and comfort when locking. - Excellent corrosion resistance - Shackle double bolts in lock body - Shackle, case and supporting elements of the locking mechanism are made of special hardened steel - Very intensive use of special weight-optimized alloy and light materials - Soft-touch coating feels good in the hand and protects paint job from damage - ABUS Plus cylinder offers high protection against picking - ABUS Code Card provided for easy key replacement, re-ordering - Mechanism Type: Key - Diameter: 12 mm - Shackle Shape: Round - Shackle Height: 230 mm - Shackle Width Inner: 8.3 cm - 2 keys are supplied with the lock - 1 LED-lighted key are supplied with the lock

GRANIT™ XPLUS™ 540 PLAY IT SAFE! The highest level of security from the ABUS range: The GRANIT XPlus™ 540 U-Lock offers the best protection against theft for your bicycle Specially hardened steel, power cell technology for protection against impact and attempts to force open the lock, XPlus cylinder for the greatest protection against tampering: The GRANIT XPlus™ 540 U-Lock combines the highest-quality materials with the latest technology for protection against theft! It is a first-class lock which protects your bicycle when the risk of theft is high. Various quality seals demonstrate the value of the GRANIT XPlus™ 540 U-Lock: It is VdS approved and has received seals of approval from institutes in Russia, the Netherlands, Finland, Sweden, Denmark, Norway and the United Kingdom. - 33/64" hardened square shaft parabolic shackle - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, housing and the structural parts of the locking mechanism are made of specially hardened steel - ABUS XPlus cylinder for the highest level of protection against tampering, e.g. picking - Automatic keyhole cover to protect against dirt and corrosion

- The Bordo 6405/85 Folding Lock features the strength of a Bordo 6500 with a Plus Key cylinder to allow lock to be keyed alike to Bosch Downtube battery lock cylinder. - Folding lock features 5.5mm steel bars with soft coating to protect bikes paint. - Folding Lock: 85cm in length - Includes replacement rack mount Bosch lock cylinder keyed alike to folding lock - Security Rating: 13 of 15

- Wall anchor and chain - 9mm chain - Textile sleeve to protect against damage to paintwork. - XPlus lock Cylinder

A HIGH-SECURITY LOCK IN A CLASS OF ITS OWN Capable of withstanding even the most determined of attacks: the BORDO GRANIT XPlus™ 6000 Folding Lock is worthy of many superlatives.

- Enjoy the benefits of the innovative SmartX cylinder and make your iOS or Android smartphone your individualised key. - 13 mm hardened square shaft parabolic shackle - SmartX locking system with Bluetooth – high-quality, keyless locking offers user-friendly operation - Alarm function with at least 100 dB for 15 seconds followed by automatic reactivation - 3D Position Detection – detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm – the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - USB-C port for charging the unit - Location storage of the bike's last parking location via the app - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, the housing and the locking mechanism's load-bearing parts are manufactured from specially hardened steel

- Enjoy the benefits of the innovative SmartX cylinder and make your iOS or Android smartphone your individualised key. - 13 mm hardened square shaft parabolic shackle - SmartX locking system with Bluetooth – high-quality, keyless locking offers user-friendly operation - Alarm function with at least 100 dB for 15 seconds followed by automatic reactivation - 3D Position Detection – detects vibrations and the smallest movement in all three dimensions and triggers the alarm - Smart alarm – the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - USB-C port for charging the unit - Location storage of the bike's last parking location via the app - ABUS power cell technology offers the highest level of protection against impacts and attempts to break open the lock - The shackle, the housing and the locking mechanism's load-bearing parts are manufactured from specially hardened steel

- Wall anchor and two loop chains - 9mm loop chains - Textile sleeve to protect against damage to paintwork. - XPlus Lock Cylinder

A HIGH-SECURITY LOCK IN A CLASS OF ITS OWN Capable of withstanding even the most determined of attacks: the BORDO GRANIT XPlus™ 6500 Folding Lock is worthy of many superlatives. The BORDO GRANIT XPlus™ 6500 Folding Lock is quite literally a tough nut for bike thieves to crack since it incorporates "granite", or at least the ABUS take on it; 5.5mm bars manufactured from specially hardened steel and connected with special rivets, which offer protection against even the most determined of attacks. The ABUS Link Protection Shield ensures that these rivets are not only flexible, but also extremely resistant to attacks involving sawing. The picking-resistant XPlus precision disc cylinder from ABUS also has a lot to offer, including outstanding protection against attempts at tampering. This combination has earned the BORDO GRANIT XPlus™ 6500 Folding Lock a phenomenal top score of 15 in the ABUS Security Level System. - 7/32" bars with extra-soft two-component casing to prevent damage to paintwork - Color-coordinated Soft-Touch silicone cover for the lock body - ABUS Link Protection Shield for a high level of protection against hinge sawing - The bars, the body and the load-bearing parts of the locking mechanism are manufactured from specially hardened steel - ABUS XPlus cylinder for extremely high protection against manipulation, e.g. picking

Replacement threaded cap for Abbey Hanger Alligment Gauge Tool.

Replacement shaft for Micro Bearing Press - 1/4" shaft diameter - 12" length

The soft face on the Titanium Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Titanium Hammer.

Replacement pins, these are original equipment chain pins for our chain tool, they also work as an alternate to the Campagnolo UT-CN300 11spd chain tool, Shimano CN-34 and CN-32 Sold in pairs.

Replacement feeler gauge for the Abbey Hanger Alligment Gauge Tool.

For use with 1/4" Micro Bearing Press Shaft

The soft face on the Shop Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Shop Hammer.

For use with 1/2" Micro Bearing Press Shaft

Replacement 6/8mm Hex bit for both the Abbey BBQ Wood Handled Pedal Wrench and the Team Issue Pedal Wrench.

1/8" mid plate, needed to use the Decade chain tool with wide 1/8" track and single speed chains.

For use with the Decade Chain Tool this AXS Mid Plate is required for the SRAM AXS Road and the new MTB Transmission Flat Top chains. This part is not needed for other 12spd chains from various manufacturers. The mid plate is visually differentiated from the other Decade mid plates by three dots on the face of the plate.

This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.

This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.

This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.

This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.

This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.

This tool makes dust wiper installation an easy task. The Fork Seal Press is built with modern tight fitting fork seals in mind. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.

This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.

This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.

The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.

The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise. The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts. Compatibility: - Chain ring lockrings on Shimano 12spd mountain crank sets. - XT and Ultegra bottom brackets