Accessories

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

 An instant bicycle suspension performance booster. WPL ForkBoost lubricates and cleans bicycle suspension seals to eliminate stiction, remove dirt, and lengthen lifetime of the seal. Apply ForkBoost externally to the dust seals of bike suspension by coating the stanchion, pumping the suspension, and wiping away extracted dirt. ForkBoost is fully compatible with rubber and rubber derivatives, causing no risk of damage to the seals, seal swelling or cracking. Use ForkBoost internally during fork rebuilds, to soak foam seals and cut grease to specified thickness - Premium bio-based formula made with natural ingredients - Biodegradable, non-toxic, PTFE-Free formula - Cleans and lubricants bike suspension seals - Removes unwanted dirt and contaminants from suspension seals - Apply externally to dust seals to lengthen seal lifetime

A compact 15-ounce water bottle optimized for smaller bike frames and kids' bikes. Perfect fit for small bikes The Voda 15 Water Bottle is clean, consistent, and at-the-ready hydration for any ride. The compact size provides 15 ounces of thirst-quenching hydration that’s designed to easily fit on smaller bike frames. It's made from recyclable, FDA-approved materials free from BPAs and phthalates. Plus, it has a Pop Top cap that's easy to open and offers secure closure for leak-free transport. - Compact 15-ounce size easily fits into smaller frames and on kids bikes - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Optimized for use with a Side Load cage - Bottle and cap are dishwasher safe and recyclable - USDA-approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts

Our #1 Accessory recommendation to enhance enjoyment of using a TowWhee. For quickly connecting the Tow-Whee to the trailing bike this small loop & climbing rated carabiner make it easier & faster than looping through itself stand alone. This loop can stay on the trailing bike permanently. The carabiner stays on the TowWhee and make it easy to hook the TowWhee into a loop to carry over your shoulder or clip to your pack.

An ingenious lightweight multi-function tool! Two levers connect to form power link pliers for removing or installing a chain's master link. Power Lever easily separates into two pieces for use as two tire levers. Integrated chain hook holds chain steady while removing or installing master link. - 4 Tools: PowerLink pliers, tire levers and stainless steel wire chain hook - Tool Material: Engineering grade polymer - Chain link storage compartment - Size: 11.5 x 2.3 x 1.8cm / 4.5" x 0.9" x 0.7" - Weight: 45g / 1.59oz *Not compatible with Shimano QUICK-LINK (SM-CN900-11)

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.

Great tool for riders and home enthusiasts to remove pedals. 15mm wrench size.

Professional hub cone wrenches available in multiple sizes.

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Shop Cone Wrenches are made of durable tool steel and are thin to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and holding power. The 26mm size fits through-axle end caps and suspension fork crowns. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

The Triple Spoke Wrench is super-convenient because it fits the 3 most popular spoke-nipple sizes. Use it to keep all your bikes' wheels true, round and tight so you can keep riding strong.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

- UV stabilized stretch polyurethane strap - Securely fastens spare tube or gear to your frame - Won't absorb water and mud like a Velcro strap and won't scratch your frame