Other

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors: CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Cane Creek crown races are interchangeable between headset series.

- Prevents side-to-side play in thru-spindle bottom brackets to ensure bearings do not wear out prematurely - Replaces stock plastic preload rings on bikes with SRAM 30mm spindle cranks, Race Face 30mm spindle cranks, Easton 30mm spindle cranks, and SRAM DUB 28.99 spindles - Super durable, Precision CNC Machined 7075 piece of hardware

These finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can color match your cable guide to the Red and Blue adjustment dials, your frame color, your stem color, pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finish. Fits: - All Fox 40 Forks until 2013 (IS Brake mount) - 2002–2007 Fox 32 & 36 Forks

Fits Specialized BigHit 2001 - 2005 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0013

Fits: - 2021 Meta Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Supplied with mounting nut - Model: NSB DH0177

Fits: - 2007 - 2009 DHR - 2007 - 2009 Highline Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0108

Fits: - 2009 2010 Jedi - Formula 1 Jedi - The One (up to 2011) - Only fits bikes with 135mm rear end Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0076

SRAM’s Universal Derailleur Hanger for bikes with an M12 x 1.0mm rear axle thread. Fits: - 2020 Canyon Exceed - 2021 Santa Cruz 5010 v4 - 2022 Santa Cruz Bronson v4 - 2021 Specialized Stumpjumper EVO - 2021 Norcos w/ UDH v2.1 - 2021 YT Capra MK3 & YT Decoy MK2 - 2021+ Transition Patrol and Spire - 2021 Guerilla Gravity Trail Pistol and Gnarvana - 2021 Chromag Rootdown Ti - 2022 Canyon Spectral - 2021+ Pivot Switchblade - New bike models that feature the SRAM UDH standard. Supplied with mounting screw. Features: - CNC machined from 6061 T6 Aluminum - Anodized Pewter Finish - Model: NSB DH0152

When race day comes, you want to have every advantage. Optimizing your bike for each course is key to putting yourself in the best possible position to win. With the NSB Direct Mount Stem spacers, you can quickly change your bike’s bar height. Remove the stem mounting bolts, slip a spacer under your stem, and remount with the provided screws. Available as single spacers or as our Race Pack. The Race Pack includes 3mm, 4mm, and 6mm, spacers and a set of 4 x M6 x 25mm bolts and 4 x M6 x 30mm bolts. These spacers are designed to work with mountain bike DH forks such as the Boxxer and the Fox 40. These spacers will not work with forks such as the DNM Volcano USD-8C. - One-piece stem risers - Includes hardware - Stackable for custom heights (longer hardware required for heights over 6mm) - Fits RockShox BoXXer (2009+), Fox 40, and 2012 Marzocchi 888 forks - Weight: 3mm - 8 grams

Fits: - 2015 Demo Carbon - 2015 Demo Aluminum - 2016 Demo Carbon - 2016 Demo Aluminum - 2017 Demo Carbon - 2017 Demo Aluminum Specialized Hanger Model: S152600001 Features: - CNC machined from 6061 T6 Aluminum - Anodized black finish - Model: NSB DH0147

Fits: - Various Kona Bike models with 10x135mm rear axle - 2007 Ridley Crossbow Opus mountain bikes: - Maadh2, Maadh3, and Maadh4 - Stakh1, Stakh2, and Stakh3 - Fhast1 and Fhast2 Transition Bikes: - 2007 - 2009 Preston FR - 2007 - 2008 DirtBag - 2008 - 2009 Syren - 2006 - 2008 Vagrant - 2011 Bandit 26 - 2011 Blindside - 2007 - 2011 Double - 2009 - 2011 Covert - 2006 - 2011 Bottle Rocket Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0028

Fits Kona Stinky 2006, 2007 only Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0035

Fits Norco CRR models (older) Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0031

Fits: - Norco Kokanee - Norco Fireball - Norco Charger Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0050

Fits Rocky Mountain RMX *** Not the same as NSB DH0004 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0005

Fits: This hanger has an M12 x 1.25 thread on the hanger boss. The boss is 16.5mm tall. - 2009 Top Fuel 9.8 - 2010 Remedy 9.9, 9.8, 8, 7 - 2010 Fuel EX 9.9, 9.8, 9, 8, 8 WSD - 2010 Top Fuel 9.9 SSL, 9.8, 9.8 WSD, 8, 8 WSD - Gary Fisher HiFi, SuperFly *** This hanger is for bikes with the 2010 ABP race. It is NOT the same as 460-0502. Trek part #W307718 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0045

Fits: - 2012 Element 970, 950 and 930 29 - 2012 Slayer 70, 50, 30 - 2012 Vertex 990, 970, RSL 29" - Vertex carbon (2012 - 2016) - Element RSL and alloy 29 (2012 - 2016) - Slayer (2012 - 2014) - Slayer SS (2013 - 2014) - Instinct (2013 - 2016) - Altitude (2013 - 2016) - Thunderbolt Alloy 730 to 770 w/o Ride-9 (2014 - 2015) - Thunderbolt MSL (2015- 2016) - Thunderbolt Alloy 730 to 750 w/ Ride-9 (2016) Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0093

Fits: - Banshee Scythe - Banshee Legend MK1 *** Not the same as 460-057 (NSB DH0072) Banshee Legend MK2 *** Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0049

Fits: - 2019 Rocky Mountain Blizzard 30 50 - 2020 Rocky Mountain Blizzard 30 50 - 2019 Rocky Mountain Solo 30 50 70 - 2020 Rocky Mountain Solo 30 50 - 2019 Rocky Mountain Growler 50 - 2020 Rocky Mountain Growler 20 40 50 Rocky Mountain Part #1098057ANJ Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0143

Fits: - Maiden 2016 - 2019 - Replaces Rocky Mountain's 'Hanger 7' Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0175

Fits: - GT Fury 2014, 2015, 2016, 2017 and 2018 - GT Sanction 2015 GT Part #: KG0021N02 Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0119

Fits: - 2012 - 2013 Commencal Meta AM, SX and SL V3 - 2012 - 2013 Supreme 24 V3 and Supreme JR V3 - 2014 Meta Hip Hop V3, Meta AM Girly V3, Meta AM 650b V3, Meta AM 29 V3, Meta SX V3, Supreme 24 V3, Supreme JR V3 - 2015 Meta AM V3 650B, Meta SX V3, Meta SX 650B V3, Supreme 24 V3 - 2016 Meta AM 650b V3 - 2017 Meta TR V3, Meta AM 650b V3, Meta SX 650b V3 - 2018 Meta AM 650b V3, Meta SX 650b V3 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Supplied with mounting nut - Model: NSB DH0084

This derailleur hanger (full drive-side dropout) is for Commencal bikes with standard 10mm x 135mm rear hubs including: Fits: - Commencal Ramones AL - Commencal Super 4 Comp - Commencal Meta 55 Pro and Meta 55 Team Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0085

Replacement idler and idler kits for high-pivot Norco Aurum mountain bikes. Fits: 2019–2021 Norco Aurum HSP Specifications: Size: 16T Narrow/wide tooth profile Alloy option machined from solid 7075 T6 Aluminum Anodized pewter with laser etched graphics Steel option machined from 4140 Annealed Steel Nitrox coated with laser etched graphics Idler kit includes Enduro 6902 LLB ABEC-3 bearing Model: NSB IP0012

CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal to front and rear brakes. Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.

Replacement idler and idler kits for high-pivot Trek Session bikes. Fits: 2022 Trek Session Specifications: Size: 13T Standard tooth profile Alloy option machined from solid 7075 T6 Aluminum Anodized pewter with laser etched graphics Steel option machined from 4140 Steel Nitrox coated with laser etched graphics Idler kit includes Enduro 6903 LLB ABEC-3 bearing and retaining clip Model: NSB IP0004

- CNC machined from 6061 T6511 aluminum machined surfaces allow for better caliper alignment and more rigid brake set-up - 10-15% lighter than OEM adapters - Fit all standard 74mm disk brake calipers

Replacement idler and idler kits for Deviate bikes with 52mm chainline. Fits: 2020+ Deviate Highlander 2022+ Deviate Claymore Specifications: Size: 18T 52mm chainline Narrow/wide tooth profile Machined from solid 7075 T6 Aluminum Anodized pewter with laser etched graphics Idler kit includes two Enduro 6803 LLB ABEC-3 bearings Model: NSB IP0011

Upgrade your ride. The highly tunable DebonAir air spring is ready for whatever the trail demands. Buttery smooth feel off the top, now optimized to maintain higher ride height and add more confidence on technical terrain. - RockShox Air Spring Upgrade Kit - DebonAir C1, 170 mm, ZEB, Silver Head, A1+

Allows the use of VALT springs with Fox coil shocks.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x10 Flat Head Screws Note: Included hanger hardware is 1mm too long, it is suggested that existing hanger hardware be used!

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed. - Includes 2 clamps and screws

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Fun handlebar-mount streamers. - Quick and easy installation

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

With Garbaruk RD cage for 11-speed Shimano rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear mech thanks to the more efficiently positioned rear derailleur cage. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones.. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-46T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: Shimano 10-speed: Deore (M6000, 10-speed model) Shimano 11-speed: RD-M7000-11 (SLX), RD-M8000(XT), RD-M9000 (XTR) **NOTE: NOT compatible with Di2 (XT M8050, XTR M9050) rear derailleurs.**

CNC machined out of stainless steel, WeThePeople's Patrol Bar Ends are thinner and use a smaller diameter than most metal bar ends, which allows them to stay out of the way and virtually unnoticed, preventing you from catching them with your fingers or during a crash. Available in glossy black or polished stainless steel, the Patrol Bar Ends are built to last a lifetime.

Enduro 24x37mm ABEC-5 sealed bearing. Direct replacement bearing for outboard bottom brackets for 24mm-spindle cranks. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

Now you can use wide-range cassettes (up to 50T) with your GRX rear derailleur. Moving the upper derailleur pulley closer to the smallest cassette cog, and lower one further away from the largest cog allows your regular GRX derailleur to operate seamlessly with wide-range cassettes, like the Garbaruk 11-50T 11-speed model. - 7075-T651 Anodized Aluminum Alloy - 47g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 11-speed: RD-RX812 (GRX)

BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Bulk packaged, corrosion resistant stainless steel fasteners.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - Effective August 2018: These hangers DO NOT INCLUDE attachment hardware. Please see related items for suggested bolts - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

This kit includes all the parts required to rebuild your V2 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V2 Dropper Post ONLY.